Course Catalog



Asbestos Hazard Awareness

15 - 30 minutes

The goal of this lesson is to improve the health and safety of employees by providing required training regarding the awareness of asbestos hazards.
  Basic First Aid

15 - 30 minutes

Each employee will know how to initially respond to an accident or injury situation, become aware of first aid guidelines and "good practices," and be able to properly treat injuries and respond to emergencies.
  Basic Respiratory Protection

15 - 30 minutes

The goal of this lesson is to ensure users are qualified and properly trained in the use and maintenance of respirators.
  Behavior-Based Safety

15 - 30 minutes

The learner will correctly apply the principles of Hazard Elimination, Personal Contribution, Injury Prevention, and Self-Evaluation when implementing behavior-based safety in the workplace.
  Bloodborne Pathogens

15 - 30 minutes

The goal of this introductory course is to help employers provide a safe and healthful work environment for their employees and minimize the possibility of employee exposure to bloodborne pathogens.
  Compressed Gases

15 - 30 minutes

The goal of this lesson is to make all employees aware of the safety requirements when working with or around Compressed Gas.
  Confined Space - Entry Level

15 - 30 minutes

The lesson covers the hazards posed by Permit-Required Confined Spaces to employees during entry. It also covers the responsibilities of the Space Entrant, Attendant, or Entry Supervisor before, during, and after the space entry. This training does not qualify employees to enter Permit-Required Confined Spaces.
  Confined Spaces

15 - 30 minutes

The goal of this introductory course is to make all employees aware of the potential hazards that may exist in a confined space and understand that special precautions, training, and an approved Confined Space Entry Permit or approved Routine Entry Procedures are required for entry.
  DOT Hazardous Materials General Awareness

1 hour

This course provides general awareness training of the basic requirements of the DOT, including the definition of hazardous materials. Employees who are responsible for the transport of hazardous materials will become familiar with regulations related to packaging, marking, labeling and shipping papers. This course can be used for either new employees or as recurrent training.
  DOT Training for Drivers of HAZMAT Shipments

1 hour

This course is designed to meet DOT requirements to train each hazmat employee who "drives a motor vehicle containing hazardous material." Because more hazardous materials are transported on highways than all other modes of transportation combined, DOT requires that hazmat drivers have highway-specific training, in addition to the basic hazmat training. This course provides basic hazmat training for drivers plus the highway-specific training in pre-trip safety inspections, general vehicle operation information, vehicle attendance requirements, and safe loading and unloading. This course can be used for either new employees or as refresher training.
  DOT Training for Offerers of HAZMAT Shipments

1 hour

This course is designed to meet DOT requirements to train all employees who directly affect the safe transportation of hazardous materials. Such employees include those who load, unload, or handle hazardous materials; prepare hazardous materials for transportation; or are responsible for the safety of transporting hazardous materials. This course provides basic hazardous materials training for these employees plus training in DOT requirements for bulk and non-bulk packaging, labeling, loading, and unloading. This course can be used for either new employees or as recurrent training.
  Driver Safety

15 - 30 minutes

The goal of this lesson is to enable drivers to recognize and identify hazardous driving conditions and to minimize their risk of accidents.
  Drug-free Workplace

15 - 30 minutes

Substance abuse is a problem that affects the safety of all employees and the workplace. This lesson details ways to recognize possible substance abuse, how to get help, and the appropriate reporting procedures.
  Electrical Safety

15 - 30 minutes

The goal of this course is to reduce the financial and personnel cost of injuries due to exposure to electrical hazards. It covers general electrical safety in the workplace including the proper use of portable electrical equipment such as appliances and tools, extension cords, and Ground Fault Circuit Interrupters (GFCI).
  Emergency Response

15 - 30 minutes

Each employee will recognize their employer's responsibilities for communicating the emergency action plan, list their responsibilities in the action plan, identify requirements for alarm systems, recognize the elements of the fire prevention plan, and state responsibilities for responding to weather-related disasters, natural disasters, bomb threats, fire, workplace violence, and hazardous material incidents.
  Environmental Management

15 - 30 minutes

Upon completion of this lesson, the student will be able to identify waste management concepts, the hazards of environmental waste, the regulations in place to manage waste reduction and waste generation, and actions to take if a spill or release of hazardous material occurs.
  Fall Protection

15 - 30 minutes

The goal of this lesson is to make all employees aware of the requirements for use of Fall Protection, Work Positioning, Fall Restraint, and Fall Arrest systems.
  Fire Safety

15 - 30 minutes

The goal of this introductory course is to reduce the financial and personnel cost of fires.
  Flammable Liquid Safety

15 - 30 minutes

This lesson covers the principles of hazard recognition, general safety requirements, flashpoint protection and inventory inspections in the use of flammable and combustible liquids in the workplace.
  Forklift Operator Training

2.5 hours

Learners will demonstrate awareness of safe forklift operation principles by identifying basic key features on the lift, recognizing the technical components of forklift operation, listing safe load handling and driving practices, stating general safety rules, and inspecting and maintaining lift equipment.

This program consists of six separate modules:

  • Fundamentals
  • Stability and Capacity
  • Load Handling
  • Safe Driving Practices
  • Safety Standards
  • Inspection and Maintenance
  Hand and Power Tool Safety

15 - 30 minutes

Each employee using hand and power tools will recognize definitions and types of portable tools, the potential hazards connected with their use, including manual, electric, pneumatic, hydraulic, liquid-fueled, powder-actuated, and abrasive wheel tools, and will demonstrate the proper procedures required for each type of tool.
  Hazard Communication

15 - 30 minutes

The goal of this introductory course is to inform workers of their right to know about chemical hazards in their workplace and to meet OSHA requirements for providing employees information about the Hazard Communication Standard.
  Hazardous Waste Management

15 - 30 minutes

This lesson defines the categories of waste, and describes steps to control or minimize the generation of hazardous waste. It also covers the purpose for regulating hazardous waste, which regulatory standards apply, and the three classifications of waste generators under RCRA. Container labeling and storage requirements for hazardous waste are also addressed. It covers requirements for implementing a hazardous waste inspection program. It also covers transportation and disposal requirements, as well as emergency preparedness and contingency planning requirements.  The requirements for training personnel, reporting, and recordkeeping are covered. Proper management and disposal procedures for examples of typical hazardous, universal, and potentially hazardous wastes. Finally, methods for minimizing the generation of hazardous waste and evaluating those methods are covered.
  Hazardous Waste Operations and Emergency Response Refresher

8 hours

This course provides the basic information needed to meet the annual refresher requirements in OSHA 29 CFR 1910.120 Hazardous Waste Operation and Emergency Response (HAZWOPER) for workers at hazardous waste sites who have already completed their initial 40-hour or 24-hour HAZWOPER training. Specifically, this course provides the refresher training for workers who perform hazardous waste site operations that are subject to the requirements of 29 CFR 1910.120(a)through(p). This course does not encompass refresher training for persons subject to 29 CFR 1910-120(q)--that is, those who engage in emergency response to hazardous substances incidents.
  Hearing Conservation

15 - 30 minutes

The goal of this introductory course is to enable the employee to correctly apply the principles of hazard recognition, risk management, and rights and responsibilities when working in areas where noise is a hazard.
  Heat and Cold Stress

15 - 30 minutes

The goal of this course is to reduce the financial and personnel cost of personal injuries on the job resulting in lost workdays due to heat and cold stress illnesses.
  Hot Work with Arc Welding

15 - 30 minutes

The goal of this lesson is to provide required training in the hazards of hot work and the basic requirements for reducing the risk of injury.
  Incident Investigation

15 - 30 minutes

This lesson covers the purpose for conducting an incident investigation, the procedures to follow, and what information should be determined during the investigation. It also covers who to interview, how to properly conduct the interview, and how to complete an investigation report and recommend corrective action following the investigation.
  Ladder Safety

15 - 30 minutes

Learn common hazards associated with ladder work and how to follow safe practices to reduce these hazards. Also, learn the fall protection requirements associated with ladder work and when and how to inspect ladders.
  Lock and Tag

15 - 30 minutes

The goal of this introductory course is for the general worker to understand and comply with the lockout/tagout system of his or her workplace location/facility.
  Machine Guarding

15 - 30 minutes

This lesson covers the mechanical hazards associated with machinery use and the safeguarding requirements for those machines. It also covers methods for machine guarding, types of machine safeguards and safe practices for working around them, including PPE use and training requirements.
  Overhead and Gantry Crane Safety

15 - 30 minutes

The goal of this course is that all employees operating bridge cranes will be able to identify the requirements for inspection, operational testing, proper rigging and lifting procedures, and other safety practices relevant to crane operation.
  Personal Protective Equipment

15 - 30 minutes

The goal of this introductory course is to protect employees from work-related illness and injury. The student learns how to determine what personal protective equipment is required to perform a particular job, to inspect this equipment for defects before donning it, and how to determine when this equipment needs to be replaced.
  Safety Audits

15 - 30 minutes

The goal of this lesson is to provide awareness training for managers, supervisors, and general employees on the importance of safety audits and how to plan and conduct an audit.
  Scaffold Safety

15 - 30 minutes

Each employee working around scaffolds will recognize definitions and types of scaffolds, the potential hazards connected with their use, including electrical, structural instability, falls, and falling objects, and will demonstrate proper use of procedures required for working on or near scaffolds.
  Violence in the Workplace

15 - 30 minutes

This lesson covers best practices for keeping the work place free from violence, and how to respond if an incident does occur.
  Wastewater and Storm Water Management

15 - 30 minutes

This lesson covers regulatory background and requirements for industrial wastewater and storm water discharges and their associated permits.  It also addresses the basic requirements of a Storm Water Pollution Prevention Plan (SWPPP).